And the luxury UK fake Rolex Deepsea Challenge watches even bigger 

Figure 1 illustrates the cross-sectional view of the Ringlock system. The thick sapphire crystal in blue (3) sits directly on the compression ring in yellow (2). The RLX titanium case back in grey (1) sits against the underside of the compression ring (3). Importantly, Figure 1 reveals all the three components are in direct contact with each other no gaskets between them.The sleeve gasket in black (4) encircles around the compression ring (2) and crystal (3), bracing against them tightly and sealing the joint between the two. Another second gasket (7) creates a seal between the titanium case back (1) and the outer Oyster case. The RLX titanium case back is held in place tightly by the case back ring (6).The Ringlock system can also be described as a compound case that separates the various physical functions of a water-resistant case into various interlocking components, allowing the system to exploit specific materials for their respective physical properties.

The outer Oyster fake watches case (5) does not actively aid in the pressure resistance, rather it serves as a container for the Ringlock system. The Ringlock system, in turn, is a pressure resistant capsule for the movement.The innovative Ringlock system architecture is mostly concealed, except for one very visible portion: the raised, engraved ring around the dial is actually the top of compression ring (2) sitting directly under the crystal (3). In fact, the ring around the dial is surface (3a) in Figure 1. This visible section illustrates one of the key features of the Ringlock system, the wearer can see right through the periphery of the sapphire crystal into the compression ring that sports a concentric brushed finish.

While the purpose of the Ringlock system is to ensure water resistance at depth, its key advantage is case size.That might seem paradoxical given the Rolex Deepsea is a large, chunky watch – and the luxury UK fake Rolex Deepsea Challenge replica watches uk even bigger – but the innovative construction results in a much slimmer case as compared to a similarly pressure-resistant case with a conventional mono-body construction. Put another way, a traditional Oyster case with the same depth rating as the Rolex Deepsea would be significantly thicker.Table 1 compares the thickness of a Ringlock system-equipped case to a classic Oyster case with equivalent pressure resistance. The Ringlock construction is about 10% slimmer.